F-12 Installing Windows 2000Network Driver[When PROSet is not installed]1. Click Start menu and click [Network and Dial-Up Connection].The [Network and Dial-Up Connection] dialog box appears.2. Right-click [Local Area Connection] and click [Properties] from pop-up menu.The [Local Area Connection Properties] dialog box appears.3. Click [Configure].The property dialog box for network adapter appears.4. Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the valuespecified for HUB.5. Click [OK] on the property dialog box for network adapter.6. Click [OK] on the [Local Area Connection Properties] dialog box.Also, add or delete any protocols and services if necessary. You can operate the process from[Network and Dial-up Connection] to display the property dialog box for local area network.NOTE: We recommend you to add [Network Monitor] at[AddingServices]. [Network Monitor] can monitor the frame (or thepacket) that the computer installing [Network Monitor] sends orreceives. This tool is valuable when analyzing network trouble. Forinformation on how to install the tool, see the "Setup for TroubleProcess" later in this document.[When PROSet is installed]1. Double-click [Intel(R) PROSet Wired] on the [Control Panel] window.The [Intel(R) PROSet for Wired Connections] dialog box appears. Double-click the[Intel(R) PROSet Wired] icon.2. Put the cursor to the network driver in the list.3. Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the valuespecified for HUB.Also specify the other network driver with the same progress above.