Installing Windows 2000 F-13Re-install the Network DriverAfter installing OS and deleting the network drivers, if you want to re-install the network drivers,follow the procedure below.1. Restart OS and logon to your system.2. [Upgrade Device Driver Wizard] dialog box appears.Click [Next].3. Confirm that the [Search for a suitable driver for my device (recommended)] radio buttonis selected and click [Next].4. Select the [Specify a location] check box and deselect other check boxes.Click [Next].5. Other [Upgrade Device Driver Wizard] dialog box opens.When using [Intel(R) PRO/1000MT Network Connection], specify [Letter>:\WINNT\W2K\BC3\PRO1000\WIN2K].Then click [OK].6. Click [Next].7. Click [Finished].After re-installing the network drivers, the link speed and Duplex mode need to bespecified.Refer to "Network Driver" described earlier.Graphics Accelerator DriverInstall the display driver using the following procedure.1. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.2. Run the "CD-ROM Drive Letter:\WINNT\W2K\VIDEO\SETUP.EXE".Follow the message on the screen.When the message "Digital Signature Not Found" message appears, click on [Yes].3. Remove the NEC EXPRESSBUILDER CD-ROM and restart the system following amessage on the screen.
