Configuring Your Server 4-273. For RAID0, select the desired stripe size. Available stripe sizes are 16, 32, and 64 KB(default).NOTE: NEC recommends that you do not change the default.4. Create RAID via allows you to select between the different creation methods for RAID0and RAID1. The following table gives examples of when each is appropriate.RAID level Create via When appropriateRAID0 No Init Creating a RAID0 on new drives.RAID0 Migrate* Creating a RAID0 from on new drive and one drive withdata you wish to preserve.RAID1 Build* Any time you wish to create RAID1, but especially if youhave data on one drive that you wish to preserve.RAID Clear Creating a RAID1 on new drives, or when you want toensure that the array contains no data after creation.RAID1 Quick Init Fastest way to create a RAID1. Appropriate when usingnew drives.
