E-14 Installing Windows Server 2003Network DriverSpecify the details of network driver.One standard network driver that is mounted will be installed automatically, but the link speed andDuplex mode need to be specified manually.[When PROSet is not installed]1. The [Local Area Connection Properties] dialog box appears.* The procedure in the case of the standard start menu1. Click Start menu, Click [Control Panel], Click [Network Connections], and Click[Local Area Connection].* The procedure in the case of the classic start menu1. Click Start menu, Click [Settings] and Click [Network Connections].The [Network Connections] dialog box appears.2. Right-click [Local Area Connection] and click [Properties] from pop-up menu.2. Click [Configure].The property dialog box for network adapter appears.3. Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the valuespecified for HUB.4. Click [OK] on the property dialog box for network adapter.[When PROSet is installed]1. The [Intel(R) PROSet Wired] dialog box appears.* The procedure in the case of the standard start menuClick Start menu, point to [Control Panel] and click [Intel(R) PROSet Wired].* The procedure in the case of the classic start menu1. Click Start menu, point to [Settings] and click [Control Panel].2. Double-click [Intel(R) PROSet Wired] on the [Control Panel] window.2. Click [(Network Adapter Name)] in the list.3. Click the [Speed] and specify the [Link Speed & Duplex Settings] value the same as thevalue specified for HUB.4. Click [Apply] and click [OK].Also, add or delete any protocols and services if necessary.You can operate the process on the property dialog box for local area network which can beappeared from [Network and Dial-up Connection].
