4-22 DBS 576 (USA) issued October 2000 576-36-700Chapter 4. User Maintenance Section 700 - OperationSet Personal Speed Dial NumbersDescriptionFor a description of Personal Speed Dial (PSD), see “Personal Speed Dial” on page 5-81 for a DigitalKey Telephone, “Personal Speed Dial” on page 6-42 for a Digital Single Line Telephone (DSLT), and“Personal Speed Dial” on page 7-36 for a Single Line Telephone (SLT).OperationTo set PSD numbers:Hardware Requirements• N/AAction Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 01.3. Press the HOLD key. 8101-PSD Assignment displays4. Press the HOLD key. 0 :PSD Number displays5. Press the HOLD key. EXT Number displays6. Dial the extension number.7. Press the HOLD key. Enter PSD # XXX displays (whereXXX = dialed extension number)8. Enter the PSD bin number (80-99).9. Press the HOLD key. YYY ZZ displays (where XXX= extension number, YYY = assignedname, and ZZ = PSD bin number)10. Enter the PSD digits to be dialed.Note: To clear an entry or existing data, press the FLASHkey.11. Press the HOLD key to store the entry. Next PSD bin number displays12. To set additional PSD numbers, press the volume up anddown key or press the HOLD key to move to the desiredPSD bin number.Desired PSD bin number displays13. Repeat steps 10-12 until all PSD numbers are entered.14. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes off
