Section 700 - Operation Chapter 5. Key Telephone Features576-36-700 DBS 576 (USA) issued October 2000 5-85To delete an SSD number:Hardware Requirements• N/ARelated Programming• FF1-0-15, 16, & 17: SSD Blocks• FF1-0-02: SSD Digits• FF1-0-03: Extension COS (SSD Assignment)• FF8-1-02: SSD Number• FF8-1-02: SSD NameConsiderations• If numbers do not appear on the display when you use SSD codes (00-79 or 000-799), yourextension is not programmed to display that data.• The System can be programmed to allow SSD numbers to override toll restrictions.Speed Dial LinkingYou can automatically link together up to 6 SSD numbers in 1 PSD bin to handle telephone numberslonger than 24 characters. You can then dial the entire number by pressing the programmed PSD keyor by entering the speed dial bin number.Alternatively, any combination of PSDs and SSDs can be manually linked together by pressing thekeys in the desired sequence. This can be useful for prepending account codes or long distance carrieraccess codes, etc.Note: Before linking multiple SSD numbers to a PSD bin, the SSD bins must already have beenprogrammed with the appropriate speed dial information.OperationAction Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. (A) Press the PROG key.(B) Press the AUTO key.OR...(A) Enter the Speed Dial Set/Clear code (default = 710).3. Enter the SSD bin number (00-79 or 000-799).4. Press the HOLD key. Cleared Spd Dial displays5. Replace the handset or press the ON/OFF key.
