6-8 DBS 576 (USA) issued October 2000 576-36-700Chapter 6. DSLT Features Section 700 - OperationOperationTo call an attendant group:Hardware Requirements• N/ARelated Programming• FF1-2: Dial Plan• FF3-0: Extension Number• FF5-0: Attendant Hunt GroupsConsiderations• Up to 20 extensions can be included in an attendant group.• The attendant pilot number is flexible.• If a member of an attendant group is for a virtual extension, multiple extensions in the attendantgroup can be made to ring at once when the virtual number is dialed.• Attendant calls are always tone calls (i.e., not voice calls).Auto Repeat DialDescriptionIf you press the REDIAL key while receiving busy tone on an outside call, the System automaticallyredials the number. The System continues to redial the number at set intervals until the called numberanswers, the caller hangs up, or the maximum of 15 redial attempts is made.OperationTo use Auto Repeat Dial:Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the attendant pilot number (default = 0).Action Result1. Press the ON/OFF key. Intercom dial tone2. Enter a trunk access code.3. Dial the phone number. Busy tone4. Press the REDIAL key. System automatically redials number
