Section 700 - Operation Chapter 5. Key Telephone Features576-36-700 DBS 576 (USA) issued October 2000 5-7extension’s TRS Class. Thus, Verified Account Code users can “float” from phone to phone, placingcalls that would normally be restricted on that phone.Non-Verified Account CodesNon-verified Account codes are voluntary codes. (i.e., You do not have to enter an account codebefore making a call.)You can assign Non-verified Account codes to both incoming and outgoing calls. To assign anaccount code to an outgoing call, you enter the account code before making the call or during the call.To assign an account code to an incoming call, you enter the account code during the call.OperationTo enter an account code before making a call:To enter an account code during an outside call:Verified Account CodesStations restricted from outside call origination by Toll Restriction Service (TRS) can be allowed tomake outgoing calls by entering a Verified Account code that changes the TRS. After a call is made,the SMDR record for the call will show the verified account code.OperationTo make an outside call that requires an account code:Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the Account Code feature code (default = 8#). Enter Account # displays3. Enter the Account Code (up to 10 digits). Specified account code displays4. Press the # key. Specified account code # displays5. Press a vacant CO key or enter a trunk access code. CO Key LED lights6. Dial the phone number. Dialed phone number displaysAction Result1. During a call, press the AUTO key.2. Press the # key. Enter Account # displays3. Enter the Account Code (up to 10 digits). Specified account code displays4. Press the # key. Display returns to call state.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the Verified Account ID code (default = 8#). Enter Account # displays
