Section 700 - Operation Chapter 5. Key Telephone Features576-36-700 DBS 576 (USA) issued October 2000 5-23To retrieve a transferred call park:Hardware Requirements• N/ARelated Programming• FF1 (System): Extension Park Hold Recall Timer• FF1-0-02: Dial Control for Floating Hold AnswerConsiderations• You cannot park more than one call at a time.• Call Park functions can be assigned to FF keys (see “Flexible Function Keys” on page 5-49).• No more than one Call Park Answer key may be assigned to a single telephone.• A Call Park Answer key may not be assigned to the EM/24 or DSS/72 console.• If a call is parked by Call Park key, the LED flashes.• LCD softkeys are also available for Call Park.• Once a call is parked, it cannot be accessed by the CO line key or direct CO access (similar toexclusive hold).• If two calls are on hold and the last call is parked, the other call is then considered the last heldcall. If a transfer is performed, the remaining held call would be the call transferred, not theparked call.• Depending on the Station Park/Floating Hold Pickup setting (FF1-0-02-0025), the station park/floating hold pickup code can set to *9 (default), 773. The floating hold pickup code (*9)operates as follows:Call PickupDescriptionThe System allows the following types of call pickup:Action Result1. At the extension with the transferred park call, lift the hand-set or press the ON/OFF key.Intercom dial tone2. Enter Call Park Answer/Self access code (default = 772). • CO TALK TRK #XX displays (whereXX = line number)• Connected to parked callSystem Size Virtual Line Number and Operation96 01-09 Floating Hold pick up10-96: For Station Park Hold pick up purposeAbove 96 001-099 Floating Hold pick up100-576: Station Park Hold pick up purpose
