Section 700 - Operation Chapter 4. User Maintenance576-36-700 DBS 576 (USA) issued October 2000 4-35Hardware Requirements• N/ARelated Programming• N/AConsiderations• N/ASet System Speed Dial NumbersDescriptionFor a description of System Speed Dial (SSD), see “System Speed Dial” on page 5-83 for a DigitalKey Telephone, “System Speed Dial” on page 6-44 for a Digital Single Line Telephone (DSLT), and“System Speed Dial” on page 7-37 for a Single Line Telephone (SLT).9. Enter the SSD name:• If using a large-display phone, press the soft key nextto the desired row of letters. (See Example 1 on page4-19.)• If using a small-display phone press the appropriateone-touch key. (See Example 2 on page 4-20.)Note: Press the FLASH key to clear any existing data.10. Use the bottom row of FF keys to select a single letter.• See Example 1. Large-display phone on page 4-19.• See Example 2. Small-display phone on page 4-20.Notes:• Press the * key to erase a single entry.• Press the # key to enter a space.11. Repeat steps 9-10 as many times as necessary to enter thedesired SSD name.Note: Press the FLASH key to clear the entire entry.12. Press the HOLD key to store the entry. Next SSD bin number displays13. To set additional SSD names, press the volume up or downkey or press the HOLD key to move to the desired SSD.Desired SSD bin number displays14. Repeat steps 9-13 until all SSD names are entered.15. Press the AUTO key to exit the entry mode. Enter SSD # displays16. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes offAction Result
