Section 700 - Operation Chapter 3. System Features576-36-700 DBS 576 (USA) issued October 2000 3-19DIL Delayed Incoming Ring EnhancementPrior to Version 3.0, a DIL call that was not answered by the Immediate Ringing extension wassimultaneously passed to all other extensions in the MCO if Delayed Ringing was set. Beginning withVersion 3.0, an incoming DIL call that is not answered can be passed to a single Delayed Ringdestination or to all extensions with an MCO key that includes the incoming trunk. If the DelayedRinging extension is not answered, the call is forwarded the extension’s preprogrammed location(e.g., Voice Mail, Call Forwarding, etc.) For example:Note: The program settings in the previous figure can also be used for the following DelayedRinging extension destinations:- Speed Dial- Hunt Group Number- Attendant Group Number- ERA NumberHardware Requirements• N/ARelated Programming• FF2-0-BSSC-03 (Ring Assignment)• FF2-0-BSSC-04 (Delayed Ring Assignment)• FF1-0-02-0027 (DIL Delayed Ringing Pattern)Considerations• N/ADIL Immediate(DIL Destination = 300)DIL Delayed(DIL Delayed Destination = 301)Both Versions Version 2.6 Version 3.0FF2-0-BSSC-031 (DIL Dest. = 300)1. Call rings on Ext. 300 onlyFF2-0-BSSC-0441 (DIL Dest. = 300)1. Call rings on Ext. 3002. Call rolls over to Ext. 301, 302 and303 simultaneously because they havean MCO key that includes the trunk.FF2-0-BSSC-041 (DIL Dest. = 300)1. Call rings on Ext. 3002. System can be programmed to ringExt. 301 only, or to ring all threeextensions.
