Section 700 - Operation Chapter 4. User Maintenance576-36-700 DBS 576 (USA) issued October 2000 4-31Hardware Requirements• N/ARelated Programming• N/AConsiderations• N/ASet System Date/Time/DayDescriptionThe System allows you to change the date, time, and day of week. When setting the time, you canspecify 12 or 24 hour format.OperationTo change the system date, time, and day of week:Special Day 20 Date(MMDD)1209Start Time(HHMM)1210 1212 1214 1216 1218Mode (0-5):0=None1=Day 12=Day 23=Night4=Night (1)5=Night (2)1211 1213 1215 1217 1219Action Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 000.3. Press the HOLD key. 0 :YYMMDDDate displays4. Enter the year (two characters), month (two characters), andday (two characters).Note: To clear an entry or existing data, press the FLASHkey.FF8 1 07 1 (1000-1219) Hold (MMDD or HHMM or 0-5) Hold-- VALUES --(MMDD, HHMM, or 0-5)-- ADDRESS NOs. (1000-1219) --MODES1st MODE 2nd MODE 3rd MODE 4th MODE 5th MODE
