Section 700 - Operation Chapter 4. User Maintenance576-36-700 DBS 576 (USA) issued October 2000 4-15Hardware Requirements• N/ARelated Programming• N/AConsiderations• N/ASet Mode ScheduleDescription(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page3-27.)You can set the System to automatically enter None, Day 1, Day 2, Night, Night (1), or Night (2)modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day.(This menu allows the setting of the patterns.)7. Enter the Message Key ID code.Notes: The ID code may contain up to 16 digits and contain0, 1-9, *, #, pause (REDIAL key).To clear an entry or existing data, press the FLASH key.8. Press the HOLD key to store the entry. Next extension number displays9. To set additional Message Key ID codes, press the volumeup or down key or press the HOLD key to move to thedesired extension.Desired extension number displays10. Repeat steps 7-9 until all Message Key ID codes are set.11. Press the AUTO key to exit the entry mode. MSGID - EXT Number displays12. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes offAction Result
