6-30 DBS 576 (USA) issued October 2000 576-36-700Chapter 6. DSLT Features Section 700 - OperationTo set DND for another extension:To cancel DND for another extension:Hardware Requirements• N/ARelated Programming• FF1-0-03: Extension COS (Manual DND Override Send)• FF1-0-03: Extension COS (Forced DND Override)• FF1-0-03: Extension COS (DND Set/Clear)• FF1-0-03: Extension COS (DND Set/Clear Other)• FF1-2: Dial Plan• FF3: Extension COSConsiderations• Forced DND override is available.• DND override function is available by Busy Override code.DP to DTMF Signal ConversionDescriptionDial Pulse (DP) to Dual Tone Multifrequency (DTMF) Signal Conversion allows you to switch fromDP to DTMF signaling when using a DP trunk. For instance, if you dial into a Voice Mail systemusing a DP trunk, you can switch to DTMF signaling to communicate with the Voice Mail system.(The System can automatically change DP to DTMF tones based on the incoming and outgoingtimers).Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the DND Set by Other Phone code (default = 740).3. Dial the extension number.4. Replace the handset or press the ON/OFF key.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the DND Cancel by Other Phone code (default = 750).3. Dial the extension number.4. Replace the handset or press the ON/OFF key.
