Section 700 - Operation Chapter 7. SLT Features576-36-700 DBS 576 (USA) issued October 2000 7-41OperationTo set the Timed Reminder Call feature:To cancel the Timed Reminder Call feature:Hardware Requirements• N/ARelated Programming• N/AConsiderations• An alarm tone (default = 60 seconds) will be issued at the specified time.• An extension can have only one Reminder Call set at a time.• To change the Reminder Call, simply enter a new time.• If the extension is in use when the reminder call is scheduled, the reminder call is issued 3minutes later.Trunk AccessDescriptionThe System supports the following ways to seize an idle trunk to make an outside call:• Direct Trunk Access• MCO Trunk AccessAction Result1. Lift the handset. Intercom dial tone2. Enter the Timed Reminder Set code (default = *31).3. Enter the time you want the Timed Reminder Call to sound.(Enter the time in 24-hour format. For example, 0100 for 1AM, 1300 for 1 PM).4. Replace the handset.Action Result1. Lift the handset. Intercom dial tone2. Enter the Timed Reminder Cancel code (default = *39).3. Replace the handset.
