Section 700 - Operation Chapter 7. SLT Features576-36-700 DBS 576 (USA) issued October 2000 7-37• Storing a new number erases any previously stored data.• Speed Dial numbers can contain up to 24 characters.• Single Line Telephone SLT can only enter 0, 1-9, *, and #. If a pause, MCO code, intercomlevel, Dial Pulse (DP) - Dual Tone Multifrequency (DTMF) code, or SSD code needs to beprogrammed, use User Maintenance to program the speed dial.System Speed DialYou can store frequently called numbers using the SSD feature. Either 80 or 800 SSD numbers can beprogrammed, depending on how the System is configured. In an 80 SSD-number system, the SSDnumbers are stored in bins 00-79. In 800 SSD-number systems, the SSD numbers are stored in bins000-799.OperationTo assign SSD numbers:To dial an SSD number by entering the speed dial bin number:To delete an SSD number:Action Result1. Lift the handset. Intercom dial tone2. Enter the Speed Dial Set/Clear code (default = 710).3. Enter the SSD bin number (00-79 or 000-799).4. Dial the phone number.5. Hookflash.6. Replace the handset.Action Result1. Lift the handset. Intercom dial tone2. If necessary, access an outside line. Outside dial tone3. Enter the Speed Dial Originate code (default = 80).4. Enter the SSD bin number (00-79 or 000-799).5. Complete the call and replace the handset.Action Result1. Lift the handset. Intercom dial tone2. Enter the Speed Dial Set/Clear code (default = 710).3. Enter the SSD bin number (00-79 or 000-799).4. Hookflash.5. Replace the handset.
