6-36 DBS 576 (USA) issued October 2000 576-36-700Chapter 6. DSLT Features Section 700 - OperationOperationAfter receiving an offhook signal during a call:Note: For details about handling multiple calls, see “Call Hold” on page 6-15.Hardware Requirements• N/ARelated Programming• FF3: CO Off-Hook Signal.Considerations• The CO call type may be either multiple ring, direct, or camp-on.• The system does not send the offhook signal under the following conditions:• During a conference call• During an OHVA or Busy override• Data Privacy is enabled• the receiving telephone is a 3rd party voice mail.Offhook Voice AnnounceDescriptionYou can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook VoiceAnnounce (OHVA) feature to make an announcement that only the called party can hear. You canalso transfer a held call to a busy extension after making the announcement using this feature.OperationTo make an OHVA:Action Result1. Press the HOLD key.2. Press the flashing FF key for the CO line of the incomingcall.Action Result1. Lift the handset or press the ON/OFF key.2. Dial the extension number. Busy signal3. Enter the OHVA feature access code (default = 8).4. Make your announcement
