Section 700 - Operation Chapter 4. User Maintenance576-36-700 DBS 576 (USA) issued October 2000 4-37Set Text Message RepliesDescriptionThis menu item specifies reply text messages.OperationTo set Text Message Replies using either a large-display or small-display phone:Action Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 11.3. Press the HOLD key. 8111-Text Message displays4. Enter 1.5. Press the HOLD key. 8111-1:Reply Message displays6. Press the HOLD key. Enter Msg # displays7. Enter the Message number (0-9).8. Press the HOLD key. A B C D E F Xdisplays (where X = Reply Text Messagenumber)9. Enter the Text Message (up to 15 characters):• If using a large-display phone, press the soft key nextto the desired row of letters. (See Example 1 on page4-19.)• If using a small-display phone press the appropriateone-touch key. (See Example 2 on page 4-20.)Note: Press the FLASH key to clear any existing data.10. Use the bottom row of FF keys to select a single letter.• See Example 1. Large-display phone on page 4-19.• See Example 2. Small-display phone on page 4-20.Notes:• Press the * key to erase a single entry.• Press the # key to enter a space.11. Repeat steps 9-10 as many times as necessary to enter thedesired Text Message.Note: Press the FLASH key to clear the entire entry.12. Press the HOLD key to store the entry. Next message number displays
