Section 700 - Operation Chapter 5. Key Telephone Features576-36-700 DBS 576 (USA) issued October 2000 5-101To assign Variable Mode Functions to a Large Display TelephoneFlexible Screen PositionsHardware Requirements• A 44-Series Display Telephone or or the VB-43225 Large Display TelephoneRelated Programming• FF4-2: Flexible Screens• FF3-0: Variable ModesConsiderations• The small display telephone will exit variable mode after a variable mode function is executed.• The large display telephone will stay in variable mode after a function is executed.Voice RecognitionDescriptionVoice Recognition allows you to dial another extension or a speed dial number using verbalcommands. You can also quickly access various telephone features by voice.Action Result1. Press the ON/OFF key.2. Using the FUNCTION EXT menu, display the desiredextension function location (see Flexible Screen Positionsbelow).3. Press PROG + soft key + Fixed Feature Code (see Table 5on page 5-52).OR...Press PROG + 95 + (XX) + REDIAL + Flexible FeatureCode (see Table 5 on page 5-52).Note: Where XX is the Flexible Screen position as listedbelow.4. Press the ON/OFF key.Variable Mode DisplayPosition Displays atPosition 1 to 10 Intercom Dial Tone/Intercom DialPosition 11 to 15 Intercom Ringback TonePosition 16 to 25 Intercom Busy TonePosition 26 to 30 Talk
