5-20 DBS 576 (USA) issued October 2000 576-36-700Chapter 5. Key Telephone Features Section 700 - OperationTo retrieve a call from Floating Hold:Hardware Requirements• N/ARelated Programming• FF1-0-01: Floating Hold on HOLD Key• FF1-0-02: Dial Control for Floating Hold Answer.• FF1-2: Dial Plan• FF4: FF-Key Feature AssignmentConsiderations• The number of floating hold orbits available may very depending on the Station Park/FloatingHold Pickup setting (FF1-0-02-0025). The floating hold pickup access code can be set to *9(default). The “*9” access code operates as follows:Exclusive HoldWith Exclusive Hold, only the extension that held the call can retrieve it. Exclusive Hold can be usedto hold CO calls and extension calls.OperationTo place a call on Exclusive Hold:Action Result1. (A) Press the FF key assigned to the Floating Hold orbitnumber where the call is held.OR...(A) Enter the Floating Hold Pickup feature access code(default = *9).(B) Enter the Floating Hold orbit number 001-576 (CPC-288/576), 001-099 or (CPC-288/576)(See considerations below.)CO XXX displays if line released (whereXXX = outside line number)System Size Virtual Line Number and Operation96, 01-09 Floating Hold pick up10-96: For Station Park Hold pick up purposeAbove 96 001-099 Floating Hold pick up100-576: Station Park Hold pick up purposeAction Result1. While on a call, press the CO key used for the call or pressthe HOLD key.• Intercom dial tone• Hold CO XXX displays (where XXX= outside line number)
