3-46 DBS 576 (USA) issued October 2000 576-36-700Chapter 3. System Features Section 700 - Operation• Network Centralized Voice Mail (Version 2.5 and higher)• Networking Extension Calling• Network Flash Transfer (Version 2.5 and higher)• Network Hold (Version 2.5 and higher)• Network Paging• Network Transfer Recall (Version 2.5 and higher)• Tandem CallingFor more information on System Networking, see the System Networking Reference Manual.Network Attendant ReversionNetwork Attendant Reversion enables calls to revert to the attendant in the same cabinet. Calls willnot revert if the cabinet receiving the call has no attendant. Network Attendant Reversion does notwork with Network Hold.Network Call RoutingNetwork Call Routing allows multiple systems that are interconnected in a network, to direct calls to aspecific tie line based on the number dialed. The call does not leave the network.Network Call TransferNetwork Call Transfer allows a call at an extension to be transferred to another extension in thenetwork.Network Centralized AttendantNetwork Centralized Attendant allows one primary attendant group in the network to handle networkattendant calls.Related Programming• FF6-2-07: Closed NumberingNetwork Centralized Voice MailNetwork Centralized Voice Mail allows one primary voice mail system to support the network. (Thisfeature does not apply to integrated Voice Mail or Built-In Voice Mail.)Related Programming• FF6-2-04: Route Table: Digit Modify Pattern No.• FF6-2-05: Digit Modify Table - Add Ending Digits• FF6-2-05-0005: Numbering Plan• FF6-2-06: Authorization Code (UK Only)• FF6-2-09-0001: Dialing Access Voice Mail System• FF1-0-04: Trunk COS (Priority Message - Waiting Send/Cancel)• FF8-1-05: Call-Forward ID Codes for Voice Mail• FF8-1-06: MSG Key ID Codes (USA only)Network Extension Calling
