5.1 STARTING UP148 Installation Manual5. Port Service SettingScreen output:Incoming Call Services for all ports (Day/Night) can be defined by this setting. Defaultvalues for all ports (Day/Night) are "Automated Attendant Service (Custom 1)". Toselect other incoming call services, go to "Setting Ports".6. Password SettingScreen output:You can assign the System Administrator Password and System Reset/ClearPassword in this screen, if necessary.IMPORTANT• We strongly recommend that you set the password to 10 characters formaximum protection against hackers.• Do not carelessly reveal the password to other persons.• Please change the password periodically (for instructions, see 7.2.3 SetPassword (PASS) in 7.2 UTILITY COMMANDS.)To go to the next screen without assigning the password, Press ENTER.All ports are currently set up to handle callers with standard automated atten-dant operation, day and night mode, using the Custom Service feature (Custom1). You can change the operation to standard Voice Mail (Custom 2) or leave itas automated attendant. If necessary, Custom 1 and Custom 2 can be modifiedunder the menu 'Program -> Service Setting -> Custom Service.'Day Mode Night ModeAuto. Attend.Auto. Attend.Auto. Attend.Auto. Attend.A: Auto. Attend., V: Voice Mail, S: Next ScreenAuto. Attend. (using Custom 1), Voice Mail (using Custom 2)Quick Setup- Port Service SettingPORT 1PORT 2Quick Setup-Password SettingSystem Administrator Password(Maximum 10 characters)NEW PASSWORD : =VERIFICATION : =System Reset/Clear Password(Maximum 10 characters)NEW PASSWORD : =VERIFICATION : =
