D3 SETTING UP MESSAGE WAITING NOTIFICATION370 Installation ManualNoteIf a telephone number has not been assigned to the selected device number, you cannotset the device status. See "Assigning Notification Numbers" to assign a telephonenumber.5. Press [1], [2], or [3] to select the device status.• [1] Schedule (enabled on the schedule)• [2] Continuously (enabled whole day)• [3] Not Use (disabled whole day)Assigning Notification NumbersUp to 3 telephone or beeper numbers can be set for message notification. Use the numberkeys 0 to 9, the tone/pulse switch, and the Beeper Callback Number Display Entry Code [X]to make these assignments.When the Beeper Callback No. Entry Code is added at the end of a beeper number, the VPSwill ask the caller to enter the callback number that will display on the beeper. SystemProgramming determines if the Callback Number Entry is to be entered before, after, orwithout the message.It is also possible to have the caller select whether or not to enter a callback number. TheSystem Manager must authorize the use of the Beeper Callback No. Entry Code.1. Log in the Main Menu.2. Press [2] to set Message Waiting Notification3. Press [3] to assign Telephone Number.4. Press [1] to change the first telephone number, [2] to change the second telephonenumber, or [3] to change the third telephone number.5. Press [1] to set the telephone number.6. Type the telephone number.7. Press [2] to accept the entry.• [1] Change the telephone number• [2] Accept• [3] Review• [4] Add more digits• [5] Insert a pause• [6] Set dial mode• [7] Insert a wait for dial tone
