B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS266 Installation ManualTable B-6Parameter Value Range(Default)Description/FunctionNew MessageRetention Time1-30 days0: Unlimited(30)Defines the number of days that an unplayed messagewill remain in the mailbox. The storage period begins theday after the message reception.Saved MessageRetention Time1-30 days0: Unlimited(30)Defines the number of days that a played message willremain in the mailbox. The timing is "refreshed"whenever the message is played back. If "0: Unlimited"is selected, the saved message will remain in themailbox until erased by the subscriber.Message Length 1-6 min0: Unlimited(3)Defines the maximum message length.If set to "0: Unlimited", a subscriber can record two-wayconversations of unlimited length into his or anotherperson’s mailbox (Two-Way Recording or Two-WayTransfer). The maximum recording time for othermessages will automatically be set to 6 min.Mailbox CapacityMaximumMessages5-100 msgs(100)Specifies the maximum number of (both new and saved)messages that can be stored in a mailbox.Mailbox CapacityMaximumMessage Time5-100 min0: Unlimited(100)Specifies the total number of available minutes forstoring (both new and saved) messages in each mailbox.Message RetrievalOrder1. LIFO2. FIFO(LIFO)Specifies the order in which messages will be retrieved(played back for listening).LIFO: Messages are retrieved starting with themost recent.FIFO: Messages are retrieved starting with theoldest.MessageScanning withInformation1. Yes2. No(No)If set to "Yes", the VPS adds the message sender’s nameand the recording date and time to the message duringthe message scan.Prompt Mode 1. System2. User 13. User 2(User 1)Specifies the language used for voice prompts played forthe subscriber during a Message Waiting NotificationCall and Subscriber Service.NoteIf User 1 or User 2 is specified as Prompt Mode butnot recorded by the Message Manager, the VPS willautomatically play the factory-recorded Systemprompts in English.Delete MessageConfirmation1. Yes2. No(No)If set to "Yes", the VPS requests confirmation from themailbox owner before erasing a message left in themailbox. If set to "No", the message is erasedimmediately.
