B2 SYSTEM ADMINISTRATION—MAILBOXES260 Installation ManualAll CallsTransfer toMailbox1. Yes2. No(No)If this parameter is set to "Yes", all calls routed to theextension are automatically forwarded to the extension’smailbox without ringing the telephone. Forwarding isaccomplished through the Automated Attendant service.Callers are permitted to leave a message.NoteWhen this feature has been set to "Yes", the mailboxowner’s extension does not necessarily need to existas a phone extension of the PBX.Caller IDNumber 1 forToll SaverUp to 20 digitsconsisting of1-9, 0,(None)Specifies up to two Caller ID numbers or a DID number forToll Saver. The subscriber can check whether there arenew messages in his mailbox with these phone numberswithout incurring telephone charges. Note that when thesephone numbers are specified by the subscriber, the phonenumbers are unavailable to other subscribers in thesystem. (The phone numbers must be unique.)Notes• If Toll Saver is set to "Caller ID" in your Class ofService, a DID number for Toll Saver cannot beassigned. If Toll Saver is set to "DID number" inyour Class of Service, Caller ID Number 1/2 forToll Saver cannot be assigned. If Toll Saver is setto "No" in your Class of Service, neither Caller IDNumbers nor a DID number can be assigned.• DID number setting for this feature is onlyavailable when the VPS is connected to thefollowing PBXs with DPT Integration.• KX-TD816 (P311Q or higher)• KX-TD1232 (P211Q or higher)• KX-TD500 (V4M or higher)Caller IDNumber 2 forToll SaverDID Numberfor Toll SaverTable B-3Parameter Value Range(Default)Description/Function
