B7 SYSTEM ADMINISTRATION—HARDWARE SETTINGS336 Installation ManualTransfer to Outside Parameters-Caller ID Modify TableTable B-50Parameter Value Range(Default)Description/FunctionEFA Transfer 1. Disable2. Enable(Disable)Specifies whether or not the VPS uses EFA (ExternalFeature Access) when transferring an incomingoutside call to an outside line.If set to "Enable", the VPS transfers an incomingoutside call to an outside line according to the EFATransfer Sequence specified in Table B-49. Thisparameter is available with DPT Integration only.If set to "Disable", the VPS transfers an incomingoutside call to an outside line according to the CallTransfer to Outside Sequence specified in Table B-49.Caller IDCallback1. Disable2. Enable(Disable)Specifies whether or not the VPS allows a subscriberto call back the party who left a message in hismailbox with the Caller ID number sent from thePBX. This setting applies to the trunk group numberused when the message with the Caller ID numberwas left in his mailbox.Outside LineAccessSequence forCaller IDCallbackUp to 12 digitsconsisting of 0-9, ,#, F, R, T, S, W(9T)Specifies the sequence of outside line access codesfor Caller ID Callback.This parameter is available when the VPS executesCaller ID Callback without using EFA.Caller IDModify Table(1-4)1-4(1)Specifies the number of the Caller ID Modify Tablethat is used when the VPS converts the Caller IDNumber sent from the PBX to the VPS.To access the menu for Caller ID Modify Table, follow the menu path as shown:System Administration Top Menu-1-6-3-4-3-Table No.(1-4)Table B-51Parameter Value Range(Default)Description/FunctionLocal AreaCode/InternationalCodeUp to 6 digitsconsisting of 0-9(None)Specifies the local area/international codes that areused when the VPS converts the Caller ID Numbersent from the PBX to the VPS.
