D4 CUSTOMIZING THE MESSAGE MANAGER’S MAILBOXInstallation Manual 3736. The VPS plays the current operator’s extension setting. Press [1] to change or assign theoperator’s extension. Press [2] to accept the current setting, or Press [3] to delete thecurrent setting—Go to Step 9.NoteOperator 1’s extension number cannot be deleted.7. Type the extension number.8. The VPS plays the current extension setting. Press [2] to accept it.9. Repeat Steps 6-8 to assign or to delete the extension number for the Day, Night, Lunchand Break Modes for each operator.10. The VPS plays the current Telephone number 1 setting. Press [1] to change thetelephone number. If a telephone number has not yet been assigned, go to Step 11.Press [2] to accept the current setting—Go to Step 13.11. Type the telephone number using "0-9" and " ".Notes• Please make sure you begin the telephone number with a Line Access Code (to seizea CO line).• When connected to the KX-TD500, the maximum number of characters allowed tobe entered is 24; when connected to other KX-T series PBX, 16.12. The VPS plays the current Telephone number 1 setting. Press [2] to accept it.13. The VPS plays the current Telephone number 2 setting. Press [1] to change thetelephone number. If a telephone number has not yet been assigned, go to Step 14.Press [2] to accept the current setting.14. Type the telephone number using "0-9" and " ".15. The VPS plays the current Telephone number 2 setting. Press [2] to accept it.
