B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS316 Installation ManualOther Parameters-Message Waiting NotificationControls the handling of message waiting notification calls.Outgoing CallSetupSequenceUp to 12 digitsconsisting of0-9, , #, F, R,S, T, W(T)Specifies the sequence of codes used by the VPS whencalling a CO line. You can set up to 12 digits. The defaultvalue is "T". "T" indicates that the system will dial thetelephone number only after detecting a dial tone.Example:9W = (9) - 1-s wait - dial telephone number. "9" is the COline access number.F: Hook FlashR: Ringback Tone DetectionS: Silence DetectionT: Dial Tone DetectionW: Wait for 1 s1-9, 0, , #: Dial CodesTo access the menu for Message Waiting Notification Parameter, follow the menupath as shown:System Administration Top Menu-1-5-8-3Table B-32Parameter Value Range(Default)Description/FunctionOutgoingCall PortsPort No.(1-2)Specifies the port numbers used for the Message WaitingNotification Device feature. The VPS makes outgoingcalls using the port specified in this parameter. At least 1port must be specified.MessageWaitingLamp PortsPort No.(1-2)Specifies the port numbers used for the Message WaitingNotification Lamp feature.The VPS turns on the Message Waiting Lamp of theextension using the port specified in this parameter. Atleast 1 port must be specified.Table B-31Parameter Value Range(Default)Description/Function
