7.2 UTILITY COMMANDSInstallation Manual 1951. Type SAVE, then Press RETURN.2. Select item to be backed up, then Press RETURN. The size of the file will be displayed.3. Press RETURN.4. Perform a Standard File Transfer. Set the data terminal to the receiving (Answer) mode(Xmodem) and specify the backup filename. The specified data will be transmitted to thedata terminal.Notes• The data terminal that you use must be equipped with communications software thatsupports the Xmodem file transfer protocol. The command can be canceled byTyping [\] before entering the receiving mode. Once the receiving mode has beenselected, use the cancel command of the communication software being used.• If your data terminal supports a high speed, it is recommended that you SAVE at themaximum speed of 38400 bps. First, change the RS-232C setting of the VPS (seeB7.1 RS-232C Parameters). Next, change the RS-232C setting of your data terminalto the same speed.$ SAVEVPS Flash Memory Data Save (VPS -> PC : Xmodem)1: Program2: Parameters3: System Prompts4. User Prompts-15. User Prompts-26. Custom Service Menus7. Personal Greetings8. Company GreetingsSelect No. :=To start press 'RETURN'- - - - - - SAVE Start!!
