3 − Menu screens18 TASCAM SS-CDR1Operations in the menu screensYou can perform operations in the menu screens as fol-lows.To select an item (vertically in the screen):•Turn the MULTI JOG dial of the SS-CDR1.Use the cursor § , ¶ keys of the remote.To confirm the highlighted item:•Press the MULTI JOG dial of the SS-CDR1.Press the ENTER key of the remote.To move the cursor left/right:•Use the ∆ , ˚ keys of the SS-CDR1.Use the cursor ˙ , ¥ keys of the remote.To select a sub-screen not currently shown in the•screen (an arrow is shown at the right):Press the ˚ key of the SS-CDR1.Press the cursor ¥ key of the remote.To return to the previous menu level:•Press the ∆ key of the SS-CDR1. Press the cursor˙ key of the remote.To return directly to the home screen from menu•mode:Press the TIME (ESC) key of the SS-CDR1.Press the CLR/ESC key of the remote.NOTEIf there is an item above (or below) the currently•displayed list, a § or ¶ symbol will be shown atthe top or bottom of the list.As a specific example, we’ll explain how to turn the•PLAY menu item AUTO CUE “on”, and then changethe auto cue level.1 Press the MENU key to access the main menu listscreen.2 Select the desired menu.From the SS-CDR1:Turn the MULTI JOG dial to highlight PLAY, and thenpress the MULTI JOG dial.From the remote:Use the cursor § , ¶ keys to highlight PLAY, andpress the ENTER key.3 Select the AUTO CUE item.From the SS-CDR1:Turn the MULTI JOG dial to highlight AUTO CUE, andthen press the MULTI JOG dial (or the ˚ key).From the remote:Use the cursor § , ¶ keys to highlight AUTO CUE,and then press the ENTER key (or the cursor ¥ key).4 Turn the AUTO CUE item ON.From the SS-CDR1:Turn the MULTI JOG dial to highlight ON.From the remote:Use the cursor § , ¶ keys to highlight ON.5 Proceed to the AUTO CUE sub-screen.From the SS-CDR1:Press the ˚ key.From the remote:Press the cursor ¥ key.6 Set AUTO CUE LEVEL to the desired level.From the SS-CDR1:Turn the MULTI JOG dial to select a value.From the remote:Use the cursor § , ¶ keys to select a value.7 To return to the home screen.From the SS-CDR1:Press the TIME (ESC) key.From the remote:Press the CLR/ESC key.