4 − PreparationsTASCAM SS-CDR1 23NOTERegardless of the current device, you can insert a CDat any time that the power is on.1. As shown in the illustration, hold the disc with itslabel surface facing upward, and insert it part ofthe way into the slot.2. As you continue pushing the disc, it will be auto-matically pulled inside just before it disappearsinto the slot.If the disc does not go inIf the disc gets stuck or is difficult to insert, do notattempt to force it in. Press the EJECT key and removethe disc, and then re-insert it (forcing the disc into theslot may damage the mechanism).Inserting a CDPress the EJECT key.The disc will be ejected part of the way; use your fingers topull it out the rest of the way.Removing a CDBefore you perform operations using the SS-CDR1, youwill need to select the device (CD or CF) corresponding tothe media (CD or CF card) that you want to use. The select-ed device is called the “current device.”To select a device, press the front panel SELECT key orthe remote’s DEVICE SELECT key to make the indicator(CF or CD) of the desired device blink, and then press thefront panel MULTI JOG dial or the remote’s ENTER keyto confirm the selection (the device indicator will changefrom blinking to steadily lit).To cancel the device select operation, press the front panelTIME (ESC) key (or the remote’s CLR / ESC) key).Selecting the deviceSELECT keyTIME (ESC) keyDEVICE SELECT key