7 − Using the folder finder56 TASCAM SS-CDR1Adding files to a playlistHere’s how to add files to the desired playlist.1 With the file menu screen displayed, turn thefront panel MULTI JOG dial (or use the remote’scursor § , ¶ keys) to highlight ADD PLAYLIST.2 Press the front panel MULTI JOG dial (or theremote’s ENTER key).The playlist select screen will appear.3 Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to highlight theplaylist in which you want to register the file.4 Press the front panel MULTI JOG dial or ˚ key(or the remote’s ENTER key or cursor ¥ key).The selected playlist will appear.5 Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to select the positionwithin the playlist at which you want to add thefile. The file will be added after the highlightedfile.6 Press and hold the front panel MULTI JOG dial (orthe remote’s ENTER key).The file will be added to the playlist.Dividing a file (DIVIDE)Here’s how to divide a WAV file into two files.This is possible only if the play mode is set to consecutiveplayback (CONTINUE).NOTEYou can undo the Divide operation after executing•it (“Undoing a file menu operation (UNDO)” onpage 58).You cannot divide an MP3 file.•1 Use the PLAY key, ∆ , ˚ keys, time searchfunction, and time skip function etc. to locate tothe point in the WAV at which you want to divideit, and pause at that point.Since you can make fine adjustments later, the approxi-mate location is sufficient.2 Press and hold the front panel MENU key (or theremote’s FINDER key) to access the folder finderscreen.The screen will show the folder finder screen for thecurrent file you operated in step 1, and the current filewill be highlighted.3 Press the MENU key to access the file menu screenfor the current file.4 Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to highlightDIVIDE.5 Press the front panel MULTI JOG dial (or theremote’s ENTER key).The home screen will appear.The SS-CDR1 will enter Scrub Play mode, and thePLAY key and READY key will blink.6 Use the Scrub Play function to find the precisepoint at which you want to divide the file.Turn the front panel MULTI JOG dial (or use theremote’s SKIP keys) to move the point using scrub play-back.7 When you’ve specified the dividing point, pressthe front panel MULTI JOG dial (or the remote’sENTER key).The display will ask EXECUTE?.If you want to change the dividing point, press the frontpanel TIME (ESC) key (or the remote’s CLR/ESC key).You will return to scrub play mode, and can repeat theprocedure from step 6.