Tascam SS-CDR1 Owner's Manual

Also see for SS-CDR1: Technical documentation

Contents

11 − CD-RW managementTASCAM SS-RCD1 73Refreshing a disc (complete erasure)7. Once again press the front panel MULTI JOG dial(or the remote’s ENTER key).Track erasure will begin.While the operation is being executed, the screen willindicate ERASE- and a progress bar will be displayed.When track erasure is complete, you will return to theCD MENU screen.NOTEWhen you execute the track erase operation on a•disc that has already been finalized, the SS-CDR1will unfinalize the disc before erasing the specifiedtrack(s).This operation can be executed only on a disc that•was recorded as CD-DA.Erasing a discHere is how to erase an entire CD-RW disc.1. Press the MENU key to access the main MENU listscreen.2. Highlight the CD MENU, and press the frontpanel MULTI JOG dial (or the remote’s ENTERkey).3. Highlight the ERASE item, and press the frontpanel MULTI JOG dial (or the remote’s ENTERkey).A popup window will appear, allowing you to select anitem.4. Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to make the popupwindow show Erase Media, and press the frontpanel MULTI JOG dial (or the remote’s ENTERkey).A confirmation screen will appear.5. Once again press the front panel MULTI JOG dial(or the remote’s ENTER key).Disc erasure will begin.While the operation is being executed, the screen willindicate ERASE“ and a progress bar will be displayed.When disc erasure is complete, you will return to theCD MENU screen.You can refresh (completely erase) a CD-RW disc.In some cases, the SS-CDR1 will be unable to recognize adisc for which finalization was forcibly interrupted (suchas if a power failure occurred during the operation) or adisc that has been used by a computer. In such cases,refreshing the disc as follows may make it recognizable bythe SS-CDR1.1. Press the MENU key to access the main MENU listscreen.2. Highlight the CD MENU, and press the frontpanel MULTI JOG dial (or the remote’s ENTERkey).3. Highlight the ERASE item, and press the frontpanel MULTI JOG dial (or the remote’s ENTERkey).A popup MENU will appear.4. Highlight the REFRESH item, and press thefront panel MULTI JOG dial (or the remote’sENTER key).A confirmation screen will appear.5. Once again, press the front panel MULTI JOG dial(or the remote’s ENTER key).The disc refresh operation will begin.While the operation is being executed, the screen will indi-cate REFRESH- and a progress bar will be displayed.When the disc refresh operation has been completed,you will return to the CD MENU screen.