Tascam SS-CDR1 Owner's Manual

Also see for SS-CDR1: Technical documentation

Contents

10 − Copying files between CD and CF cardTASCAM SS-RCD1 6510 − Copying files between CD and CF cardWhen copying or converting and copying files (MP3 orWAV files) from a CF card to a blank CD (CD-R orCD-RW), you can choose whether to write the file in itscurrent format as a data CD, or as an audio CD in CD-DAformat. If you choose audio CD format, the MP3 or WAVfiles on the CF card whose sampling frequency is 44.1 kHzcan be converted to audio CD (CD-DA) format and writtento a CD. If you are using a CD disc to which tracks havealready been written, but which has not yet been finalized,the disc format (audio CD or data CD) has already beendetermined, so the copy will occur in that format.NOTEThe SS-CDR1 cannot record WAV files to a CD, but isable to copy WAV files from a CF card to a CD. TheSS-CDR1 can play back the WAV files copied on a CD.You can copy (or convert and copy) files from a CF card toa CD. Or you can copy (or convert and copy) files from aCD to a CF card. Set the current device to CD since thesecopies are made using the CD menu. Or, before doing thefollowing procedure, insert an appropriate CD and CF cardin the SS-CDR1.Creating an audio CDHere is how to convert MP3 or WAV files on a CF card toaudio CD (CD-DA) format and write them on a CD.The following procedure assumes that the CD is selectedas the current device and that the CF card which includesthe copy-source files and the CD which is the target of thecopy are inserted in the SS-CDR1.1. Press the MENU key to access the main menu listscreen.2. Highlight the CD menu, and press the front panelMULTI JOG dial (or the remote’s ENTER key).3. Highlight the BURN TO CD item, and press thefront panel MULTI JOG dial (or the remote’s ENTERkey).The SS-CDR1 will automatically load the CF card.While the data is being read, the display will indicateMEDIA READ and a progress bar popup will appear.NOTEIf a CF card is not inserted, CF READ popup willappear after MEDIA READ indication.4. If a blank CD is inserted in the CD drive, a popupwindow asking you to select the CD writing formatwill appear after the CF card has been read. High-light “CD-DA,” and press the front panel MULTIJOG dial (or the remote’s ENTER key).The folder finder screen for the CF card will appear.NOTEIf audio CD tracks have already been written to theCD, the above popup window will not appear; CD-DAformat will be selected automatically.5. Select the source that will be recorded to the CD.As described in “Navigating in the folder finder screen” onpage 50, navigate within the finder to select the desiredfile. You cannot select a folder.If you want to select more than one file, repeat the steps ofhighlighting the desired file and pressing the CALL key.The selected files will be given a check mark. You canmake multiple selections only for files that are in the samefolder.To de-select a selected file, press the CALL key once again.NOTEThe copy-source files must have a sampling frequen-•cy of 44.1 kHz. If you attempt to select a file whosesampling frequency is 48 kHz, a popup indicatingCannot burn 48kHz files will appear.Copying/converting and copying files from CF card to CD