5 − PlaybackTASCAM SS-CDR1 35Playing back in monauralYou can play back a stereo audio file in monaural. In thiscase, the L/R channels of the track will be mixed and out-put from the L/R output channels.Use the menu to make this setting (for details on menuoperations, refer to “Operations in the menu screens” onpage 18).1 Press the MENU key to access the main menu listscreen.2 Select the PLAY menu.3 Highlight the PREFERENCE item.4 Press the front panel ˚ key (or the remote’scursor ¥ key) to proceed to the PLAY PREFER-ENCE screen.5 Select MONO MIX .6 Turn the MULTI JOG dial (or use the remote’scursor § , ¶ keys) to turn the setting ON/OFF.7 When you’ve finished making settings, press thefront panel TIME (ESC) key (or the remote’s CLR/ESC key) to return to the home screen.NOTEThis setting is remembered even when the power isturned off.Resume PlaybackIf the Resume Playback mode is on, playback will beginfrom the location at which playback was last stopped (the“resume point”).The Resume point will be erased when you perform thefollowing operations.Remove the media.•Switch the current device•Switch the play area.•Switch the play mode.•Modify the contents of the media (by recording, edit-•ing, or erasing).Use the menu to turn the Resume function on/off (fordetails on menu operations, refer to “Operations in themenu screens” on page 18).1 Press the MENU key to access the main menu listscreen.2 Select the PLAY menu.3 Highlight the PREFERENCE item.4 Press the front panel ˚ key (or the remote’scursor ¥ key) to proceed to the PLAY PREFER-ENCE screen.5 Select RESUME.6 Turn the MULTI JOG dial (or use the remote’scursor § , ¶ keys) to turn the setting ON/OFF.7 When you’ve finished making settings, press thefront panel TIME (ESC) key (or the remote’s CLR/ESC key) to return to the home screen.NOTEThis setting is remembered even when the power is•turned off.If no playable track exists (e.g., if not even one•track has been registered in program mode), ofcause, the resume point cannot be made. The coun-ter display will state 000tr 00h 00m 00s.If the resume point does not exist (i.e., if the time•registered as the resume point does not exist), thebeginning of the first track in the play area will bethe resume point.