10 − Copying files between CD and CF card70 TASCAM SS-CDR1Here is how to copy MP3 or WAV files from a data CD intheir existing format to a CF card.The following procedure assumes that the CD is selectedas the current device and that the CF card which includesthe copy-source files and the CD which is the target of thecopy are inserted in the SS-CDR1.1. Press the MENU key to access the main menu listscreen.2. Highlight the CD menu, and press the front panelMULTI JOG dial (or the remote’s ENTER key).3. Highlight the RIP TO CF item, and press the frontpanel MULTI JOG dial (or the remote’s ENTER key).The SS-CDR1 will automatically read the CF card.While the data is being read, the screen will indicateMEDIA READ and a progress bar popup will appear.When reading is completed, a CD folder finder screenlike the following will appear.NOTEIf a CF card is not inserted, CF READ popup willappear after MEDIA READ indication.4. Select the file (source file) that you want to copy.As described in “Navigating in the folder finder” onpage 50, move within the finder to select the desiredfolder or file. If you select a folder, all files in that fold-er will be the source.If you want to select more than one folder or file, repeatthe step of highlighting the desired folder or file andpressing the CALL key. A check mark will be added tothe selected folder or file. You can make multiple selec-tions only for folders or files in a single folder.To de-select a selected folder or file, press the CALL keyonce again.NOTEYou can select multiple files only within the same•folder, so once you use the CALL key to select thefirst folder or file, you will no longer be able tomove to a different folder.If you are only selecting one folder or file, there is•no need to press the CALL key. Simply highlight thedesired folder or file, and proceed to step 5.5. When you have selected all of the files to be copied,hold down the front panel MULTI JOG dial (or theremote’s ENTER key) to confirm your selection.When you confirm your selection, the folder finderscreen for the CF card will appear. In this screen youcan select the writing-destination.If you have selected copy-source files that wouldexceed the free space on the CF card or if the numberof source tracks exceeds the allowable number of fileson the CF card, a popup indicating CAPACITY OVERor TRACK OVER will appear, and you will not be ableto finish the source selection.In this case, press the STOP key to close the popup,decrease the total size or number of the source files,and then once again hold down the front panel MULTIJOG dial (or the remote’s ENTER key).6. Select the copy-destination (target).As described in “Navigating in the folder finder screen”on page 50, navigate within the finder to select thedesired folder or file.The folder or files will be written following the folderor file you select.Copy-source folders orfiles are added here.CursorThe screen before copying.Copying files from a data CD10. Once again press the front panel MULTI JOG dial (orthe remote’s ENTER key).Writing will begin.While the operation is executing, the screen will indi-cate RIP and a progress bar popup will appear.When writing is completed, you will return to the CDmenu screen.