Tascam SS-CDR1 Owner's Manual

Also see for SS-CDR1: Technical documentation

Contents

5 − Playback30 TASCAM SS-CDR1Pitch Control playbackThe SS-CDR1 can modify the pitch (the pitch and playbackspeed) of the playback (Pitch Control playback).Here is how to use Pitch Control playback.1 Press the front panel PITCH knob (or the remote’sPITCH key) to turn on Pitch Control playback.When this is on, the PITCH indicator in the display willlight in the home screen.2 Turn the PITCH knob (or use the remote’s PITCH+/- keys) to specify the pitch.While you’re making this setting, the display’s pitchcontrol value is shown as PITCH LVL XXX%.You can specify the pitch in a range of -16.0–+16.0.To turn off Pitch Control playback:Press the front panel PITCH knob (or the remote’s PITCHkey).The PITCH indicator in the display will go dark, and PitchControl playback will turn off. Even if Pitch Control play-back is off, the pitch you specified in step 2 above isremembered, and will be valid if you turn Pitch Control ononce again.TIPBy using the Key Control function in conjunction withthe Pitch Control function, you can change only thespeed without affecting the pitch (see “Key Controlplay” on page 31).NOTEWhen you turn Pitch Control playback on/off duringplayback, the playback sound may be momentarilyinterrupted.Specifying the Pitch StepYou can change the pitch step.Pitch steps are the amount of pitch change produced byturning the PITCH knob one step or by pressing theremote’s PITCH +/- key once.You must make the Pitch Step setting from the SS-CDR1itself (this setting cannot be made from the remote).1 Hold down the front panel PITCH knob.The pitch step setting screen will appear.2 While this screen is displayed, you can turn theMULTI JOG dial to specify the pitch step in a rangeof 0.1%–1.0%.3 When you’ve finished making the setting, pressthe front panel TIME (ESC) key (or the remote’sCLR/ESC key) to return to the home screen.NOTEThe pitch control setting is remembered even whenyou turn off the power.repeat. If you cancel during playback, playbackwill continue past the point specified as the end-ing point of A-B repeat playback.NOTEIf you press the STOP key to stop playback, the•specified region (A-B) will be cleared.You can’t specify A-B repeat playback across tracks.•In the home screen, A-B will light (in addition to REPEAT).The region (A-B) has now been specified, and A-B repeatplayback will begin.To turn off A-B Repeat playback:Press the remote’s A-B key or the REPEAT key.In the home screen, the REPEAT indicator and the A-B indica-tor will go dark, and A-B repeat playback will be can-celled.