10 − Copying files between CD and CF card68 TASCAM SS-CDR1You can copy/convert and copy files from a CD to a CFcard. When copying from an audio CD to the card, eachtrack file will be converted into the format you specify(MP3 or WAV file). When copying from a CD that con-tains MP3 or WAV files, the files will be copied in theirexisting format.Copying/converting and copying files from CD to CF cardHere is how to convert audio CD (CD-DA) tracks to MP3or WAV format when copying them to a CF card.The following procedure assumes that the CD is selectedas the current device and that the CF card which includesthe copy-source files and the CD which is the target of thecopy are inserted in the SS-CDR1.1. Press the MENU key to access the main menu listscreen.2. Highlight the CD menu, and press the front panelMULTI JOG dial (or the remote’s ENTER key).3. Highlight the RIP TO CF item, and press the frontpanel MULTI JOG dial (or the remote’s ENTER key).Converting and copying audio CD tracks7. Select the copy-destination (target).If the disc already has a folder structure, navigatethrough the folders as described in “Navigating in thefolder finder screen” on page 50) to select a folder orfile.The folder or files will be copied following the folder orfile you select.Copy-source folders orfiles are added here.CursorThe screen before copying.Added folders or files.CursorThe screen after copying.8. Press the front panel MULTI JOG dial (or the remote’sENTER key) to confirm your selection.A confirmation screen will appear.NOTEIf there is a conflict of names, the following popupscreen will appear.Press the ESC key or STOP key to clear the popup screenand return to the menu screen.9. Once again press the front panel MULTI JOG dial (orthe remote’s ENTER key).Writing will begin.While writing is in progress, the screen will indicateBURN and a progress bar popup will be shown.When writing is completed, you will return to the CDmenu screen.