7 − Using the folder finder58 TASCAM SS-CDR1Undoing a file menu operation (UNDO)Of the file menu operations, Divide, Combine, and Deleteoperations can be undone immediately after you have exe-cuted the operation.This is possible only if the play mode is set to continuosplayback (CONTINUE).NOTEWhen performing the Undo operation, it does notmatter which file is selected in the folder finderscreen when you open the file menu screen.1 Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to highlight UNDO.A confirmation screen will appear.2 Press the front panel MULTI JOG dial (or theremote’s ENTER key.3 Press the front panel MULTI JOG dial (or theremote’s ENTER key).The Undo operation (UNDO) will be executed, and youwill return to the folder finder screen. At this time, thefolder/file to which the Undo operation applied will behighlighted.NOTEIf you decide not to perform the Undo operation•(UNDO), press the front panel TIME (ESC) key (orthe remote’s CLR/ESC key).If there is no file operation that can be undone, the•display will indicate CAN,T UNDO.Moving or copying a file (CF card only)You can move a file on a CF card within a folder, or moveor copy it to a different folder. These operations are per-formed in the folder finder screen. (You do not need toenter the file menu screen.)The following explanations assume that the folder menuscreen for the applicable folder is displayedMoving a file within a folder1 In the folder finder screen, use the front panel ∆, ˚ keys and MULTI JOG dial (or the remote’scursor keys) to access the finder screen for thefolder that contains the file you want to move.2 Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to highlight the filethat you want to move.3 Press and hold the front panel MULTI JOG dial (orthe remote’s ENTER key).The file to be moved will blink.4 Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to move the file to thedesired location.5 Press the front panel MULTI JOG dial (or theremote’s ENTER key).The MOVE popup will appear, and the Move operationwill be confirmed.