Tascam SS-CDR1 Owner's Manual

Also see for SS-CDR1: Technical documentation

Contents

5 − Playback26 TASCAM SS-CDR1Specifying a track numberYou can use the remote’s numeric keys (0 ˗ 9) to directlyspecify the number of the track that you want to play.For audio CD format, the track number will be a maximumof two digits. For WAV format or MP3 format, the tracknumber will be a maximum of three digits.1. Use the remote’s numeric keys (0 ˗ 9) to enter thetrack number. Enter the track number startingwith the highest digit.To specify track 1•Press the 1 key once.To specify track 12•Press the 1 key ∑ 2 key.To specify track 103•Press the 1 key ∑ 0 key ∑ 3 key.2 Press the PLAY key.The selected track will begin playing.Alternatively, you can use this procedure but press theremote’s READY key instead of the PLAY key to pauseat the beginning of the selected track.NOTEAs an alternative to press the• PLAY key, you canpress the MULTI JOG dial to playback the file select-ed (or the remote’s ENTER key).You cannot use the numeric keys to specify the•track while in program or random mode.Fast-forward/rewind searchYou can rapidly search forward or backward while listen-ing to the audio of a track.1 Play or pause the desired track.2 Hold down the ˚ or ∆ key.Fast-forward or rewind search will begin.3 To stop searching, release the key you were hold-ing.You will return to the state (either playing or paused) inwhich you were prior to searching.Time searchWhile the unit is stopped, playing, or paused, you canlocate to a specified time in the specified track.NOTEYou cannot use time search when the play mode isprogram mode or random mode.1. Use the remote’s numeric keys (0 - 9) to enter thenumber as follows.For WAV or MP3 format:Track number: three digits•Elapsed time from the beginning of the track•(XX hours / XX minutes / XX seconds): two digits eachFor audio CD formatTrack number: two digits•Elapsed time from the beginning of the track (• XXminutes / XX seconds): two digits eachFor example if you want to specify a location that is 1 min-ute 30 seconds from the beginning of MP3 format track 2,you would press keys in the following order.0 ∑ 0 ∑ 2 ∑ 0 ∑ 0 ∑ 0 ∑ 1 ∑ 3 ∑ 0When you finish entering the nine digits, the SS-CDR1will automatically locate to the specified position.Similarly, if you want to specify a location that is 1 minute30 seconds from the beginning of audio CD format track 2,you would press keys in the following order.0 ∑ 2 ∑ 0 ∑ 1 ∑ 3 ∑ 0When you finish entering the six digits, the SS-CDR1 willautomatically locate to the specified position.If the unit is stopped or playing back prior to the locateoperation, playback will begin after the locate operation. Ifthe unit is paused prior to the locate operation, it will pauseafter the locate operation.NOTEIf you specify a track number that does not exist inthe current play area, or a time that does not exist inthe track, the operation will be cancelled at thatpoint.