82 TASCAM SS-CDR1Power does not turn onªMake sure that the power plug is firmly inserted.Media is not detectedªMake sure that the CF card is firmly inserted.•Make sure that the CD is not scratched or dirty•Can’t play backªIn the case of a WAV file, make sure that the file is•of a sampling frequency (44.1 kHz or 48 kHz) andbit depth (16-bit) supported by the SS-CDR1. Inthe case of an MP3 file, make sure that the file isof a bit rate supported by the SS-CDR1.Make sure that the CD is not scratched or dirty•No soundªCheck the SS-CDR1’s connections to your monitorsystem. Also check the volume of your amp.Can’t recordªCheck the connections once again.•Adjust the recording level.•A setting you changed is not rememberedªThe SS-CDR1 backs-up the settings when you changethem. This backup may fail if you turn off the power atan inappropriate time, so do not turn off the powerimmediately after changing a setting.Noise is heardªCheck whether a connection cable might have a badconnection.When editing a name, the display indicatesªName FullDue to limitations of the system, the number of charac-ters in a file name and folder name is limited to 255characters (single-byte). Since the full path within thefolder finder is limited to 255 characters, the maximumname length for a file or folder that is inside a sub-fold-er will be reduced by the number of characters used byany folders above it and any separator characters.16 − Troubleshooting
