5 − Playback28 TASCAM SS-CDR1NOTEIn this owner’s manual, we will assume that continu-ous playback is selected as the playback mode unlessotherwise specified.Using the menu(For details on how to perform menu operations, refer to“Operations in the menu screens” on page 18).1 While stopped, press the MENU key to enter menumode.2 Turn the MULTI JOG dial to highlight the PLAYmenu item, and then press the MULTI JOG dial.3 Select the PLAY MODE item.4 Turn the MULTI JOG dial to select the desired playmode.5 Press the TIME (ESC) key to return to the homescreen.NOTEThe play mode you select is remembered even whenthe power is turned off.Program playbackHere is how to play back tracks in the order of the programyou specify. You can specify a program of up to 99 tracks.1 While stopped, set the play mode to program playmode (see “Specifying the playback mode” onpage 27).2 Use the remote’s numeric keys (0–9) to enter thedesired track number for the program, and pressthe ENTER key to confirm it.The track will be registered in the program.NOTEIf you are operating from the SS-CDR1’s front panel,turn the front panel MULTI JOG dial to select the track,and then press the MULTI JOG dial.3 Repeat step 2 to register each of the desiredtracks in the program.The screen will show the program number andthe total time.NOTEYou can program the same track repeatedly.•Pressing the remote’s• CLR/ESC key will delete thelast-programmed track from the program.If you attempt to program the 100th track, an error•message of PROGRAM FULL will appear. A maxi-mum of 99 tracks can be programmed.For WAV files or MP3 files, the display will indicate•--H--M--S if the total time of the programmedtracks exceeds 99 hours 59 minutes 59 seconds. Foran audio CD, the display will indicate --M--S if thetotal time exceeds 99 minutes 59 seconds.In the case of a CD that contains WAV files or MP3•files recorded by a device other than the SS-CDR1,the total time will not be displayed. Instead, thetime display area will show the --H--M--Sindication.4 Press the PLAY key to begin program playback.NOTEIn program play mode, you won’t be able to play•unless at least one track has been registered in theprogram.If you press the• STOP key while stopped, allprogram data will be cleared.The program data will be cleared when you switch•the play mode.The program data will be cleared when you power-•off the SS-CDR1.Switching the playback time display modeYou can select the way in which the playback time isshown in the home screen.1 Press the front panel TIME (ESC) key (or the re-mote’s TIME key).Each time you press this key, you will cycle throughfour types of time display. The currently selected dis-play mode is shown above the time display area.No indicatorThe elapsed time of the current track is shown.REMAIN is litThe remaining time of the current track is shown.TOTAL is litThe elapsed time from the beginning of the play area isshown.TOTAL and REMAIN are litThe remaining time in the play area is shown.NOTEWhile stopped, the total playback time of the play•area is always shown, regardless of whether TOTALand REMAIN are lit.In the case of a CD containing WAV files or MP3•files that were recorded using a device other thanthe SS-CDR1 (e.g., a computer), the total time while