72 TASCAM SS-CDR111 − CD-RW managementIf an already-finalized CD-RW disc is inserted, you canuse the ERASE item to unfinalize the disc.1. Press the MENU key to access the main MENU listscreen.2. Highlight the CD MENU, and press the frontpanel MULTI JOG dial (or the remote’s ENTERkey).3. Highlight the ERASE item, and press the frontpanel MULTI JOG dial (or the remote’s ENTERkey).A popup window will appear, allowing you to select anitem.4. Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to choose Unfinalizein the popup window, and then press the front panelMULTI JOG dial (or the remote’s ENTER key).The following confirmation popup will appear.5. Once again, press the front panel MULTI JOG dial(or the remote’s ENTER key).Unfinalization will begin.While this operation is being executed, the display willindicate “UNFINALIZE” and a progress bar will beshown.When unfinalization is completed, you will return tothe CD MENU screen.You can use the CD MENU to perform various operationson a CD-RW; you can unfinalize the disc, erase tracks,erase the disc, or refresh the disc. This chapter explainsthese CD-RW management functions.The following explanation assumes that the CD is selectedas the current device and that a CD-RW is inserted.NOTEIn addition to these operations, you can use the CD•MENU to finalize a CD, and to copy files betweenCD and CF card.Finalizing is explained in “Chapter 6. Recording”•(“Finalizing a CD” on page 43). For details on copy-ing between a CD and a CF card, refer to “Chapter10. Copying files between a CD and CF card” onpage 65.Erasing a trackYou can erase tracks that have been recorded in audio CDformat on a CD-RW. The specified track and all subse-quent tracks (until the last track on the disc) will be erased.1. Press the MENU key to access the main MENU listscreen.2. Highlight the CD MENU, and press the frontpanel MULTI JOG dial (or the remote’s ENTERkey).3. Highlight the ERASE item, and press the frontpanel MULTI JOG dial (or the remote’s ENTERkey).A popup window will appear, allowing you to select anitem.4. Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to select the desiredcommand in the popup window. When it displaysthe command shown below, press the front panelMULTI JOG dial (or the remote’s ENTER key).5. Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to select the first ofthe tracks that will be erased. Track 12 is selectedin the screen shot above.The last track to be deleted (shown as 19 in the screenshot above) is fixed as the last track of the disc, andcannot be changed.6. When you have made your selection, press thefront panel MULTI JOG dial (or the remote’sENTER key).A confirmation screen will appear.Unfinalizing a CD