4 − Preparations20 TASCAM SS-CDR1Turning the power onPress the POWER switch to turn the power on.The SS-CDR1 will start up, and the startup screen willappear.If no media is inserted, the display will indicate NO MEDIA.If a media is inserted, the display will indicate MEDIAREADING, and the media will be read. When reading iscompleted, the home screen will appear.To turn the power off:No special shutdown operation is required. Simply pressthe POWER switch to turn the power off.CAUTIONDo not turn off the power while the device indicator(CF or CD) is blinking (i.e., while writing is occurring).Setting the date and timeHere is how to set the date and time of the internal clock.When you record, the date and time are recorded in theaudio file.1 Press the MENU key to access the menu listscreen.2 Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to highlightUTILITY, and press the MULTI JOG dial (or theremote’s ENTER key).The UTILITY menu selection screen will appear.3 Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to highlight CLOCKADJUST, and press the front panel ˚ key (orthe remote’s cursor ¥ key).The clock setting screen will appear.4 Press the front panel MULTI JOG dial (or theremote’s ENTER key).07 will be highlighted.5 Set the date and time as follows.• Use the front panel ∆ , ˚ keys (or the remote’s cur-sor ˙ , ¥ keys) to move the highlighted area to edit.• Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to change the value high-lighted.6 When you have finished making settings, pressthe front panel MULTI JOG dial (or the remote’sENTER key) to finalize the date and time settings.