Tascam SS-CDR1 Owner's Manual

Also see for SS-CDR1: Technical documentation

Contents

7 − Using the folder finder54 TASCAM SS-CDR1Adding an entire folder to a playlist (CF card only)This operation allows you to add all files from a folder onthe CF card to the desired playlist.However, files in a sub-folder will not be added.1 With the folder menu screen displayed, turn thefront panel MULTI JOG dial (or use the remote’scursor § , ¶ keys) to highlight ADD PLAYLIST.2 Press the front panel MULTI JOG dial (or theremote’s ENTER key).The playlist select screen will appear.3 Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to highlight theplaylist in which you want to register the files.4 Press the front panel MULTI JOG dial or ˚ key(or the remote’s ENTER key or cursor ¥ key).The selected playlist will be displayed.5 Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to select the positionwithin the playlist at which you want to add thefiles.The files will be added following the highlighted file.6 Press and hold the front panel MULTI JOG dial (orthe remote’s ENTER key).The folder will be added to the playlist.Undoing a folder menu operation (UNDO)Some of the operations in the folder menu (folder nameediting, adding a new folder, deleting a folder) can beundone immediately after they are executed.This is possible only if the play mode is set to continuousplayback (CONTINUE).NOTEWhen executing an Undo, it does not matter whichfolder in the folder finder screen was selected beforeopening the folder menu screen.1 Turn the front panel MULTI JOG dial (or use theremote’s cursor § , ¶ keys) to highlight UNDO.A confirmation screen will appear.In the example screen shown above, the folder deleteoperation (DELETE) can be undone.2 Press the front panel MULTI JOG dial (or theremote’s ENTER key).The Undo operation will be executed, and you willreturn to the folder finder screen. At this time, the fileto which Undo applied will be highlighted.NOTEIf you decide to cancel the Undo operation, press•the front panel TIME (ESC) key (or the remote’sCLR/ESC key).If there is no file to which the Undo operation can•be applied, the display will indicate CAN,T UNDO.Operations in the file menu screen (CF card only)The file editing operations described below can be performedon a CF card. Files on a CD cannot be edited. The followingexplanations assume that the current device is CF, and that thefile menu screen for the applicable file is displayed.To access the file menu screen, highlight the desired file inthe folder finder screen, and press the MENU key(“Navigating in the folder finder screen” on page 50).