74 TASCAM SS-CDR1Restoring the factory settingsYou can restore the menus and other settings to their facto-ry-set state. You cannot restore these settings if media isinserted in the current device.Remove the media before you perform the following menuoperation. (For details on operations in the menu screen,refer to “Operations in the menu screen” on page 18)1 Press the MENU key to access the main menu listscreen.2 Select the UTILITY menu.3 Select the FACTORY PRESET item.A confirmation popup will appear.NOTEIf you select the FACTORY PRESET item when aCompactFlash card is inserted, a popup of CAN,TSELECT will appear, and your selection will not beaccepted. Remove the card and perform the operationonce again.4 Once again press the front panel MULTI JOG dial(or the remote’s ENTER key).The settings will be reset.5 Press the TIME (ESC) key (or the remote’sCLR/ESC key) to return to the home screen.12 − Other settingsFormatting a CompactFlash cardIf CF is selected as the current device, and playback/recording is stopped, you can format the entire CF card inFAT format.Before you use a CF card used by another device with theSS-CDR1, you must format it.NOTEWhen you format a card, all folders and files storedon that card will be deleted.Perform the following menu operations. (For details onmenu operations, refer to “Operations in the menu screens”on page 18.)1 Press the MENU key to access the main menu listscreen.2 Select the UTILITY menu.3 Select the MEMORY FORMAT item.A confirmation popup will appear.4 Once again press the front panel MULTI JOG dial(or the remote’s ENTER key).The card will be formatted.During execution, the display will indicate Format.5 Press the TIME (ESC) key (or the remote’s CLR/ESC key) to return to the home screen.
