April 20172-304 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer024-340 to 024-360, 024-361Launch IssueStatus Indicator RAPsProcedureWARNINGEnsure that the electricity to the machine is switched off while performing tasks that donot need electricity. Refer to GP 10. Disconnect the power cord. Electricity can causedeath or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 3 and the ESS PWB, PL 3.10Item 6 are securely connected. Ensure all surface mounted modules on both PWBs aresecurely connected.3. Reload the software, GP 4.4. Perform the OF2 Special Boot Modes RAP.5. If the fault persists, install new components as necessary:• Drive PWB, PL 1.10 Item 3.• ESS PWB, PL 3.10 Item 6.024-361 Invalid IOT Paper Size RAPBSD-ON: BSD 3.1 PWB Communications (ESS PWB to Drive PWB)024-361 Invalid IOT paper size group information.ProcedureWARNINGEnsure that the electricity to the machine is switched off while performing tasks that donot need electricity. Refer to GP 10. Disconnect the power cord. Electricity can causedeath or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 3 and the ESS PWB, PL 3.10Item 6 are securely connected. Ensure all surface mounted modules on both PWBs aresecurely connected.3. Initialize the user NVM, refer to dC301 NVM Initialization.4. Reload the software, GP 4.5. If the fault persists, install new components as necessary:• Drive PWB, PL 1.10 Item 3.• ESS PWB, PL 3.10 Item 6.
