April 20172-555Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer 123-310 to 123-353, 123-354 to 123-381Status Indicator RAPsLaunch Issue123-310 to 123-353 UI Error 1 RAP123-310 The data sent from the UI to the controller exceeded the upper limit for the processingcapability.123-311 The data received from the controller exceeded the upper limit for the processingcapability in the UI.123-312 The data received from the controller has exceeded the upper limit of the processingcapability in the UI.123-325 The specified UI internal object could not be created due to a setting/specificationerror. UI-SW failure in the ESS PWB.123-326 The memory in the GUAM exceeded the upper limit.123-333 The H/W connection in the UI is faulty or the internal connection could not be correctlydetected.123-343 UI-SW failure in the ESS PWB.123-344 UI-SW failure in the ESS PWB.123-350 MCW panel one-touch key fail.123-352 An error internal to the con-panel (an abnormal value in EEPROM for Sys) has beendetected.123-343 UI-SW failure in the ESS PWB.123-344 UI-SW failure in the ESS PWB.123-350 MCW panel one-touch key fail.123-353 The control panel has detected that the UI cable is disconnected.ProcedurePerform the 002-500 UI Error RAP.123-354 to 123-381 UI Error 2 RAP123-354 The control panel has detected a drop in +24V power voltage.123-355 The control panel has detected a drop in +5V power voltage.123-356 The control panel has detected that FFC is disconnected from one touch key for fax orthat one touch key has a problem.123-357 The control panel has detected that writing in the EEPROM has failed.123-358 The control panel has detected that writing in the EEPROM for logging failed.123-362 UI-SW failure in the ESS PWB.123-368 There is insufficient memory or the connection failed.123-369 UI-SW failure in the ESS PWB.123-371 The parameter sent from the controller was incorrect.123-374 The job ID parameter sent from the controller was incorrect.123-377 UI-SW failure in the ESS PWB.123-379 UI-SW failure in the ESS PWB.123-380 UI-SW failure in the ESS PWB.123-381 UI-SW failure in the ESS PWB.ProcedurePerform the 002-500 UI Error RAP.
