April 20172-19Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer 003-344, 003-345, 003-346Status Indicator RAPsLaunch Issue003-344 Hotline Fail RAP003-344 Hotline failure during power on.ProcedureWARNINGEnsure that the electricity to the machine is switched off while performing tasks that donot need electricity. Refer to GP 10. Disconnect the power cord. Electricity can causedeath or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 3 and the ESS PWB, PL 3.10Item 6 are securely connected. Ensure all surface mounted modules on both PWBs aresecurely connected.3. Reload the software, GP 4.4. Perform the OF2 Special Boot Modes RAP.003-345, 003-346 X PIO Mismatch RAP003-345 When a job fail was received from the IISS, an error of the X hot line was detected.003-345 When IIT image delivered was received from the IISS, an error of the X hot line wasdetected.ProcedureWARNINGEnsure that the electricity to the machine is switched off while performing tasks that donot need electricity. Refer to GP 10. Disconnect the power cord. Electricity can causedeath or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 3 and the ESS PWB, PL 3.10Item 6 are securely connected. Ensure all surface mounted modules on both PWBs aresecurely connected.3. Reload the software, GP 4.4. Perform the OF2 Special Boot Modes RAP.
