April 20172-456 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer057-316, 057-317Launch IssueStatus Indicator RAPs057-316 Drive PWB F16 Blown RAPBSD-ON: BSD 1.10 Power Interlock Switching (3 of 3)057-316 Drive PWB fuse 16 open circuit was detected.ProcedureWARNINGEnsure that the electricity to the machine is switched off while performing tasks that donot need electricity. Refer to GP 10. Disconnect the power cord. Electricity can causedeath or injury. Moving parts can cause injury.Perform the steps that follow:1. Check the components that follow for overcurrent and overvoltage. Repair the wiring orinstall new components as necessary:• Takeaway clutch, PL 40.10 Item 5.• Bypass tray feed clutch, PL 70.40 Item 4.• Registration clutch, PL 80.55 Item 11.• Marking fan, PL 40.15 Item 8.• Exit 1 offset solenoid, PL 10.15 Item 11.• Duplex clutch, PL 80.50 Item 28.2. After the faulty circuit has been repaired, install a new drive PWB, PL 1.10 Item 3.057-317 Drive PWB F17 Blown RAPBSD-ON: BSD 1.10 Power Interlock Switching (3 of 3)057-317 Drive PWB fuse 17 open circuit was detected.ProcedureWARNINGEnsure that the electricity to the machine is switched off while performing tasks that donot need electricity. Refer to GP 10. Disconnect the power cord. Electricity can causedeath or injury. Moving parts can cause injury.Perform the steps that follow:1. Check the components that follow for overcurrent and overvoltage. Repair the wiring orinstall a new exit gate solenoid, PL 10.22 Item 9 as necessary.2. After the faulty circuit has been repaired, install a new drive PWB, PL 1.10 Item 3.
